I-Closed Cell Rubber Foam Insulation For the Cryogenic Equipment Systems Isithombe Esifakiwe

I-Cryogenic Equipment Systems ye-Cell Rubber Foam evaliwe

Isakhiwo esiyinhlanganisela yezingqimba eziningi: I-ULT (Eluhlaza okwesibhakabhaka) yongqimba lwangaphakathi;I-LT (Mnyama) yesendlalelo sangaphandle.

Izinto eziyinhloko: I-ULT-alkadiene polymer;umbala oluhlaza okwesibhakabhaka

I-LT—NBR/PVC;umbala omnyama.

Thumela i-imeyili kithi

Imininingwane Yomkhiqizo

Omaka bomkhiqizo

Incazelo

I-Kingflex Cryogenic Rubber Foam iqinile kakhulu futhi imelana nokugqokwa nokudabuka.Imelana nomswakama, amakhemikhali, nemisebe ye-UV, okuyenza ifanelekele ukusetshenziswa endaweni yasendlini nangaphandle.

I-Standard Dimension

I-Kingflex Dimension
Amayintshi	mm	*Usayizi(LW)**	㎡/Guqa
3/4"	20	10 × 1	10
1"	25	8 × 1	8

Ishidi Ledatha Yezobuchwepheshe

OkuyinhlokoImpahla	Bizinto ezibonakalayo		Okujwayelekile
OkuyinhlokoImpahla	I-Kingflex ULT	I-Kingflex LT	Indlela Yokuhlola
I-Thermal Conductivity	-100°C, 0.028 -165°C, 0.021	0°C, 0.033 -50°C, 0.028	I-ASTM C177
Ibanga Lokuminyana	60-80Kg/m3	40-60Kg/m3	I-ASTM D1622
Ncoma Izinga Lokushisa Lokusebenza	-200°C kuya ku-125°C	-50°C kuya ku-105°C
Iphesenti Lezindawo Eziseduze	>95%	>95%	I-ASTM D2856
Umswakama Performance Factor	NA	<1.96x10g(mmPa)	I-ASTM E96
Ukumelana nokumanzi Factor μ	NA	>10000	EN12086 EN13469
I-Water Vapor Permeability Coefficient	NA	0.0039g/h.m2 (25mm ubukhulu)	I-ASTM E96
PH	≥8.0	≥8.0	I-ASTM C871
Tenthula Amandla Mpa	-100°C, 0.30 -165°C, 0.25	0°C, 0.15 -50°C, 0.218	I-ASTM D1623
Comprssive Amandla Mpa	-100°C, ≤0.3	-40°C, ≤0.16	I-ASTM D1621